Standard specification :
The MHE NEXT Goods lifts all have the following standard specification:
- Three phase drive unit
- Serve up to 9 metres travel
- Integral Control System
- Single or through entry
- Push button stations complete with car position indicator, lift in use indicator and door open signal
The following options are available across our goods lift range:
- Non-standard car sizes
- Through car arrangement
- Cars, doors, and frames available primed or in stainless steel
The MHE NEXT Goods Lift is easy to produce, as well as being flexible and quick to install. This results in a short delivery times and low costs. Very little space is needed to install the lift and it makes the maximum use of available floor area.
Installation Friendly Design
With its self-supporting design and electrical plug-in system, the minimum of site preparation work is needed. The lift can be installed in existing environments, a shallow pit will be required. The mechanical and electrical controls are placed within the shaft, so a separate machinery room is not necessary. The MHE NEXT Goods Lift is energy efficient, easy to install and maintain.
Main Specifications :
|Model Type||Goods Lift|
|Rated Load||500kg, 750kg, 1000kg & 1500Kg|
|Rated Speed||10 s/m|
|Power Supply||415v, 3 phase, 50hz, 5-wire|
|Pit||150mm nominal please see product specification|
|Shaft Size||See layout data|
|Controls||Call and send buttons at each landing. Lift in use, car position indicator and door
open buzzer at each landing.
|Configuration||Single entry with through car option|
|Door Type||Swing hinge doors to collapsible gate, drop bar|
|Shaft Enclosure||Standard freestanding structure clad by others. Note structure requires horizontal
ties to the building fabric. Structure cladding available on request.
|Car||Car with manual door operation.|
|Special Items||lift arrival buzzer, lift out of use indicator|
|Training||Operation demonstrated on completion.|