The latest appearance design method was used to create the R series fluent and aesthetic outline, which matches the latest appearance trend.
Thanks to the long wheelbase design, the longitudinal stability of whole truck is much better, the hoisting capacity at same lift height are enhanced by an average of 100KG compared with former truck. At the same time, it prolongs work time of rear wheel as the reduced rear axle¡¯s load. The travel speed of truck has been raised, for example, the 2-2.5T type comes to 20km/h. Increasing the hard proportion of hydraulic pipe, adopting right angle connector or straight through connector, that reduce the pressure loss of pipeline, and raise the lifting speed of mast, the speed is increased by an average of 10% compared with former truck.
The environment friendly engines all meet EU stage-2 emission control regulation. The noise emission also comes to EU standard.
The metal hood and molding sound insulation matches environmental protection demands.
A throttling device is set in pipe system£¬the mast won¡¯t result in failing control of mast even some pipes broke. By using a built-in hood lock device, the safe level of the truck has been raised.
Main Specifications :
|Fork size||L x W x T||mm||1150 X 122 X 40|
|Fork overhang ( Wheel center to fork face)||mm||475|
|Overall dimensions||Length to face of fork||mm||2530|
|Overhead guard height||mm||2120|
|Turning radius(out side)||mm||2175|
|Min.right angle stacking aisle width (Add load length and clearance)||mm||2650|
|Lifting (Full load)||mm/sec||450|
|Lowering (Full load)||mm/sec||500|
|Max. Drawbar Pull (Full load)||N||22600|
|Max. Gradeability ( Full load)||%||25|
|Tyre||Front||mm||7 .00- 12 -12 PR|
|Rear||mm||6.00 – 9 – 10PR|
|Weight Distribution||Full load | Front / Rear||kg||4815 / 625|
|No load | Front / Rear||kg||1640 / 1800|
|Battery||Voltage/Capacity (20HR)||V/ Ah||12 / 100|
|Manufacture||Xinchai ( Racaldo UK )|
|Rated output / rpm||Kw||45 / 2500|
|Rated torque /rpm||N.m||193 / 1800|
|Bore x Stroke||mm||86 X 105|
|Fuel tank capacity||L||70|
|Operating pressure||For attachments||Mpa||17.5|