No we do not have any collaborators. All the machines have been designed and developed by us. We have been working on this equipment for long & we have built our equipment in line with CE standards.

The turning radius is the angle required for a machine to turn into a racking system or a gangway and  differs from equipment to equipment. Refer individual specification catalogue of specific equipment. The aisle width is the width required for equipment to go into an aisle and turn 90 degrees comfortably to enter a racking system. Is determined by the length of the equipment with the load on it.

The closed mast  height of the machine is the height when the mast is completely lowered and the forks are resting on the floor. This can define height of the entrance of the factory, shopfloor or a warehouse. The extended mast height is the height of the machine when the forks are at the maximum height and is used to determine the clear roof height available.The lift height the height up to which you want the forks to raised.

Internationally the life of a machine is determined by the availability of spares. It is a norm that spares for any machine is available for 7 years and hence that determines the life of the machine. We will make spare parts available up to 10 years.

Our machines are normally designed for use in 3 shifts if the batteries are replaced at regular intervals. Ideally, any  equipment must be rested at regular intervals. We offer most of the equipment with  AC drives, it has a lot of advantage over DC drive. One of the major advantage is that  you can work for a longer time  with  a battery of the same capacity  compared to competition who offers the DC system. Our sales person can explain this better to you in an  one to one meeting.  Please contact our nearest sales personnel.

The life of a battery is calculated by number of  charging cycles. The battery that we use has a life cycle of 1000 -1200 charge cycles. One charge cycle is when you plug-in and once and disconnect. If the power goes off while charging one charge cycle is complete.

Kindly contact our representative. He will explain how to calculate the power consumption. It depends on various factors.

The maximum time required to charge battery is 8 hours. High speed chargers are available if you wish, but we do not recommend the same as they reduce the  life of a  battery. Battery is abused if you try to charge faster.

We use AC motors. AC motors does not have carbon brush, hence  this is a total saving for you when you buy MHE Next Equipment!

The ideal floor condition is a clean floor without any pits and bumps. It is not good if the floor is very smooth since the ground clearance is very less in case of low bed material handling equipment like pallet trucks, stackers, reach truck  etc.

We have fully trained service engineers located all over India. Kindly drop us a mail on service@mhenext.com  for an immediate reply.

All our equipment are warranted for 1 year working one shift per day not exceeding 8 hours. The warranty reduces if the number of shifts increases. For example - if the machine is used for 2 shifts that warranty is only 6 months and for a  3 shift working for a maximum period of 1000 hours.

No, we do not supply a stand by machine with our experience we have observed that we are the fastest in terms of delivery. We meet our delivery commitment. Our standard time delivery time for standard equipment is 3- 4 weeks.

Yes we do. We rent pallet trucks, Electric Stacker, Reach Truck and Forklifts only. Please talk to our executive to know more.

Yes, of course we can build a customized machine for you!  We just need to understand your requirement fully, first. Please request a visit from our technical team to understand your requirement in detail. You might have noticed that our logo says “ CUSTOMISED HANDLING SOLUTION “ ….

Yes, we represent following international brands

•   Combilift Limited, Ireland – Specialized in handling awkward & long loads ( 4 way multi directional forklifts, Side loaders etc).
•   Aisle Master, Ireland – Articulated forklift operating in aisle as small as 1600 mm & with a lift height up to 12600mm.
•   Cascade Corporation –USA -  Internationally leading  brand for all kind of forklift attachments.
•   Snorkel, UK, Complete solution Aerial Access platform trucks ( Scissor Lift Platforms, Telescopic & Articulated boom lift )
•   Hefter Cleantech, Germany Complete range in floor cleaning equipment ( Sweepers & Scrubber Driers)

Technically speaking we do not agree with term “Discount “  as our price list is very competitive.

We justifiably rate our brand as one of the top in the country as MHE NEXT  equipment are working round the clock in number of industries like automobile, engineering, pharmaceuticals, chemical, logistics, textiles, PSU  etc. We are sure  our renowned customers list can definitely define our brand to you ( DHL, FedEx, Flyjack Logistics, CCI Logistics, Kuehne + Nagel, Unichem Laboratories, Lupin , Cipla, Aristo Pharma, Crompton Greaves, Siemens, Sabic Innovative, Sandvik Asia,Thyssen Krupp, Ashok Leyland, P& G, Agro Pack,  HAL, Alok Textiles, PolycabWires, Putzmeister, Technova etc.)

We rate our Brand as a  top brand  because we continuously get repeat orders from our customers.

 

The Trust & Belief of our customer in us. Quality of product, Timely Delivery  & prompt after sales service

You’re not alone. Most people don’t buy material handling equipment every day. Most are not familiar with all the options available. We are here to assist you in every way we can. We can design, outfit or install just about any system for any business there is. Our sales people are most well versed on what products will work best for your specific need and our engineering and consulting staff are more than happy to assist you in choosing the various products and options available. We will work within your budget and suggest materials that allow you to update and modernize your operation as your business grows and expands.